Axon Pulsar — Sur-Ron Light Bee
Complete installation guide for fitting the Axon Pulsar upgrade motor to the Sur-Ron Light Bee. Please read all sections carefully before beginning.
Allow yourself a good amount of time. Rushing causes pinched wires and incorrect fitment — both time-consuming to diagnose.
A good set of allen / hex keys is essential. We will not accept responsibility for products or bolts damaged by incorrect tooling.
You are installing an upgrade to an electric motorcycle. If you lack the experience, please seek a professional. Motorcycles can be dangerous when incorrectly installed.
Armond has been part of the Sur-Ron community in the USA since it began. He has guided and tested the Axon Pulsar motor installation, documenting the process in the video walkthrough below. Please watch the video guide before you start. Questions? Contact us at info@axon.racing.
You will receive two spacers of different thickness with your Axon Pulsar motor for the Sur-Ron Light Bee. Refer to the diagram below for correct placement.
.png)
Use the thicker spacer here on the front face of the motor.
Use the thinner spacers here on the front face of the motor.
On the rear of the stock motor you will have a spacer on each mounting point. When you remove the motor, note the orientation of these spacers and reuse them in the same orientation to mount your Axon motor. You will also need to reuse the motor adjustment piece to correctly align your motor belt tension.
Reuse stock spacers from the stock motor in the same orientation.
Reuse the stock motor adjustment tool to correctly line up your belt tension.
The phases on your Axon motor are clearly denoted with their respective letters. Ensure phase cables are connected to your controller in the correct orientation for correct motor operation.
Ensure phase cables are connected in the correct orientation to guarantee correct motor operation.
For product queries or installation help contact us at info@axon.racing